Operating Instructions

Set-Up

  1. Ensure all fittings are connected firmly
  2. Fill interior with ice (at least halfway)
  3. Lock wheel brakes when at desired location. Check for stability
  4. Secure drain bucket in place with bungee chord or connect drainage hose (not included)
  5. Connect the supply hose to the filter
  6. Open all taps and run water for two minutes to flush the pipes
  7. Make sure the unit is draining properly
  8. Close all taps

Operation

  1. Depress spigot lever with cup/bottle
  2. Drain Bucket Option: check drain bucket regularly

Breakdown/Cleaning

  1. Shut off the hose
  2. Empty the Drain bucket/disconnect drain hose
  3. Open all taps
  4. Disconnect the braided hose from the filter to drain the coils
  5. To clean the inside of the coils: put a small amount of dish soap inside the braided hose, reconnect it to the filter, and run the water for 5-10 minutes
  6. Reconnect the braided hose to the filter
  7. Open the drain on the bottom corner of the cooler to drain the melted ice
  8. Remove the remainder of the ice and dry unit for storage
  • To clean the unit: Use any non-toxic cleaner (such as Simple Green) with a sponge or a rag and rinse with warm water. Be sure to clean the Drip trays, spigots, fittings, drain hose, and the inside of the cooler.
Skip to toolbar